|
Steel Blanks Specifications
Spec #:
4
Date:
11/16/2007
Revision #:
A
| Flatness |
Must Meet ASTM A568 |
| Length Tolerance |
+/- .010 |
| Width Tolerance |
+/- .005 |
|
Chemical Characteristics |
Must Meet ASTM A366 |
| Thickness |
Min. to Mid Range of
Gage |
| Formability |
Must Meet ASTM A366 |
| Hardness |
ROCKWELL 45-60 B Scale |
| Finish |
CQ Class 1 Matte |
| Skid Weight |
2,000 lbs max. skid weight |
| Packaging |
Two 4” x 4” running lengthwise
with 2 runners crosswise. Side unloads with forklift. |
| Tagging |
Each skid/load must be identified with Sintel, part number, work order
number (if supplied) and purchase order number. One part per skid. |
| Replacement Time for Rejections |
48 hours unless arrangement have been made. NCR (Nonconforming
Material Report) must be returned with cause and corrective action by
due date. |
*** NOTE ***
Supplier must
send packing list with every shipment stating that he material shipped is in
compliance with Sintel specification sheet #4. If material is
not in compliance with specification, supplier is liable for rejected material
and/or down time and sorting time costs at Sintel Inc.
Burr tolerances and Sharp edges.
All parts must be free
of sharp edges and the maximum allowable burr is 10% of material thickness .
Burrs in excess of 10% must be removed prior too shipment.
Copyright 2005 Sintel, Incorporated. All rights reserved.
Revised:
July 20, 2009 01:26 PM. |